TitleProduct

Indoor Water-Based Sealant

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-04 23:08

  • Browse the number:

    41

Send an inquiries

Company Profile

Guangzhou Jointas Chemical Joint Stock Co., Ltd.

By certification [File Integrity]

Contact:Mrs. Ameilei Zhang(Mr.)  

Email:

Telephone:

Phone:

Area:Guangdong

Address:Guangdong

Website: http://antas-2011.ccetca.com/

Product Details


Indoor Water-based Sealant
(AT-153 )

 
At-153 is one-component water-based sealant, safe and environment-friendly. In the using process, there is no volatile organic solvent. It is especially designed for indoor aluminum, glass, tiles and other general interior construction materials. It can also be used for furniture, the inside of cabinets, and wall, baseboard, flooring angular line, door and window frames, and the gap between the walls.





Features:
1. Water-base acrylic sealant
2. No solvent
3. Paintable
4. Good adhesion to most building mater

Limitation:
AT-153 should not be applied:
1) For the gap continious immersed in the water.
2) On the damp and frosted surface.
3) for structural glazing.
4) When there is water or rain within 4-6 hours after the sealant applied.
5) When the temperature is below 5º C.
6) for the gap wider than 20 mm.

Maintenance
It does not contain volatile organic solvents. The tack free time is about 3 hours. It takes 28 days for fully cure. In the beginning of using the sealant, the substrate has to be remained fixed and flat. As for maintenance, mark with the new sealant of the same color and quality.

Safety
The product does not release volatile organic solvents in the construction. Avoid eye contact when operating. If happened, rinse opened eye under running water for several minutes. Construction should ensure good ventilation. If necessary, take protective measures. Please keep out of reach of children.

Package
AT -153 is packed in standard plastic drum, and the net capacity is 300ml.

Transport and storage
The product is not flammable or explosive, so it can be transported by the normal way. Products must be stored in cool and dry place within 5º C-25º C.

Shelf life: 12 months from the manufacturing date within 5º C-25º C

Limited warranty information
The information contained herein is offered in good faith and is believed to be accurate. However because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's test to ensure that our products are safe, effective, and fully satisfactory for the intended use shall not be taken as inducements to infringe any patent. The customer's exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
Antas disclaims liability for any incidental or consequential damages.




 
Technical parameters:
Number Test items JC/T 484-2006 index Measured value(12.5P)
1 Appearance Even, exquisite paste,  Even, exquisite paste,
no bubble, no skinning, no gel  no bubble, no skinning, no gel
2 Density, g/cm3 1.51±0.1 1.51
3 Tack free time,h ≤ ≤ 3 1
4 Breaking elongation/% ≥ 100 113
5 Breaking elongation(waterishlogged)/% ≥ 100 665
6 Extrudability, ml/min, ≥ ≥ 100 178.6
7 Sag degree Horizontal, mm, ≤ No deformation No deformation
Sag degree Verticality, mm, ≤ ≤ 3 0
8 Elastic recovery / % N/M 37
9 Low temperature flexibility(-5ºC) No crack, no delamination, no cohesive failure No crack, no delamination, no cohesive failure
10 Mass loss rate, %, ≤ ≤ 10 7
11 Tension & compression test  No destruction No destruction
(the same temperature)